SASILplus – switch disconnectors with fuses for a perfect system
A user-independent jump switchgear with manual or motor drive ensures a clearly defined switching speed, and with that a switching capacity of up to 120kA. Extensive accessories installed ex works in 2‑, 3- or 4‑pole versions allow a high degree of flexibility in plant planning. SASILplus creates safe and reliable low-voltage main distributions.
„Wer neue Wege gehen will, muss alte Pfade verlassen.“
– Manfred Grau –
EASY INSTALLATION
As the strip automatically produces a contact, it only needs to be pushed into place. No fiddly, millimetre-precise positioning; no securing with screws –simply attach the strip guide and push SASILplus in like a drawer.
LOW WEIGHT
You will also notice the weight advantage of SASILplus when you install it, as you can quickly integrate or replace the strips in large switch cabinet openings by insertion, even under tension.
SAFETY
Because we at JEAN MÜLLER like to think ahead and also consider things from our customers’ point of view, we incorporate additional safety features that also make their work easier. Our interlock function prevents strips from being inadvertently being installed or removed when they are switched on.
PRODUCT VIDEOS
Standardisation creates benefits –
form 4b of the internal subdivision creates
safety
–Same installation dimensions width / depth
– 25mm grid for all device heights
System accessories
– Busbar supports
– Strip guides
– Covers for busbars, cable connections and blank panels
– Female connector for plug-in auxiliary circuits
– Switching interlock / assembly lock
– Cable separation covers
– Extract tool
Current measurement made easy
— Retrofittable by customer
— Pre-assembled wiring harness for wiring to connector
— Contacting positively driven when plugging SASILplus
— Assembly options 1‑pole, 3‑pole, 4‑pin (2 x in L1)
— Calibrated and certified for class 0.5 and 0.2
— Moving-iron instruments for instantaneous measuring
— Bimetalic instrument for average measurement
— Plug-in instruments
— Scales for vertical and horizontal mounting
Continuous data acquisition and processing –
the base for the technology of tomorrow
Measuring sensor EE07
— Ongoing monitoring / measurement of all relevant current- and voltage-data in 3‑phase power network
— Safe wiring with RJ-45 connectors
— Configurable via PLMasterplus or PLVario-NET
RJ-45 interface
– Data transmission from measuring sensor EE07
— Serial CAN-BUS communication
Fuse monitoring unit ES07
– Signaling of fuse-status by potential-free relay contacts
— Local display of fuse-status by LEDs (1 LED per phase)
— Internal power supply
— Operate delay for correct signaling
Performance and reliability by using a revolutionary new contact system
— User-independent snap-action mechanism
— High short-circuit strength up to 120kA
— High switching capacity up to AC23B
— Quadruple interruption
— Reliable isolation for fuse-replacement with quadruple interruption
— Low wear by pre contact system
Safe disconnection of busbar systems with SASILplus busbar coupler
— NH3/630A — Module height 150mm
— Connection / disconnection of two 2- or 3‑pole busbar systems 185mm
— Isolation of entire units or sections
— Safe separation of system by using busbar separation
— Optional: Total current measurement of all downstream outgoing units
Remote control with SASILplus MOT
— Acquisition and change of switching state via remote data transmission from the control station
— Automated or semi-automated network control
— LEDs for fuse-monitoring, switch-position, status display
— Local control possible
— Technical parameters similar to standard devices
— Combination with manually operated SASILplus disconnectors possible
— Operating buttons can be locked with up to 3 padlocks
— Operating-mode selector switch
— Remote control
— Local control
— Locked
— Manual operation in case power fail of the control voltage by means of emergency function
Benefits of the double plugable SASILplus
— Highest availability
— Fully pluggable (in- and outgoing) main- and control circuit at the smallest room
— Removable part according DIN EN 61439–1:2012–06
— Same dimensions as SASILplus Standard
— No cable disconnecting necessary
— IP2x protection from all sides
— Compatible with SASILplus Standard accessories (excluding EE07)
— Combination with SASILplus Standard possible
— Same technical data as SASILplus Standard
Sasilplus in the Online product catalogue
SASILplus cover a wide range of the most diverse product variants. Choose the perfect product for your application from our online product catalogue.
To the products
